Plastic rods
POM-C rod black
Would you like to buy black POM-C rods? At Martan you can obtain black POM-C rods as technical solid rods for precision turned parts, bushes, rollers, guides…
Colour
Description
Would you like to buy black POM-C rods? At Martan you can obtain black POM-C rods as technical solid rods for precision turned parts, bushes, rollers, guides and other machine components.
The rods are offered in a length of approx. 1,000 mm. Choose the suitable diameter and order your black POM rod online.
Buy black POM-C rod
POM-C is an engineering construction plastic with high rigidity, good dimensional accuracy and very good machinability.
The black version is particularly suitable for technical components where, in addition to the mechanical properties, a dark, uniform material colour is also required.
Typical advantages:
- high rigidity
- high dimensional stability
- good dimensional accuracy
- very good machinability
- good sliding and wear properties
- low water absorption
- good surface quality
- black material colour
- suitable for precision turned parts
Choose the required diameter and order your black POM-C rod directly online.
Black POM rod 1000 mm
Martan offers the black POM-C rods in a length of approx. 1,000 mm.
This makes the semi-finished product suitable as a starting material for numerous technical components and smaller series.
Typical applications are:
- bushes
- rollers
- rings
- bolts
- sleeves
- guides
- spacers
- bearing parts
- gears
- precision turned parts
Depending on the required component length, the round material can subsequently be cut further to size and machined.
Select POM rods by diameter
The diameter is one of the most important selection criteria for POM round material.
Various rod diameters are available to choose from on the product page. You select the specific available size directly via the variant selection.
When selecting, you should particularly take into account:
- required finished diameter
- necessary machining allowance
- wall thickness of the later component
- component geometry
- mechanical load
- planned machining
For turned parts, the starting diameter should offer sufficient material for the subsequent finishing work.
POM-C rod cut to size
Do you only need a specific section of the round material?
Then a POM-C rod cut piece may be useful.
The starting material can be prepared according to the required component length and then further machined mechanically.
Typical machining processes are:
- sawing
- turning
- milling
- drilling
- threading
- CNC machining
A suitably prepared POM rod cut to size can reduce material consumption and machining effort.
Properties of black POM-C rods
Black POM-C combines high mechanical stability with very good machinability.
Typical properties are:
- high strength
- high rigidity
- good dimensional stability
- low moisture absorption
- good abrasion resistance
- good sliding properties
- low coefficient of friction
- very good machinability by cutting
- good surface quality after machining
As a result, POM-C is particularly suitable for precision technical functional parts.
You can find further material information in our polyoxymethylene material profile.
What are black POM-C rods used for?
Black POM-C rods are used above all where precise mechanical components are required.
Typical areas of application are:
- mechanical engineering
- plant engineering
- jig and fixture construction
- conveyor technology
- automation technology
- electrical engineering
- appliance construction
Typical components are:
- bearing bushes
- gears
- clamping parts
- guides
- rollers
- sliding components
- spacers
- insulating support elements
- technical visible parts
Turning POM-C rod
POM-C is one of the particularly easy-to-machine engineering plastics.
The material is very well suited to turning and enables clean surfaces as well as precise component geometries.
When turning, the following should particularly be taken into account:
- sharp tools
- suitable cutting speed
- adapted feed rate
- controlled heat input
- suitable clamping conditions
In this way, precise rotationally symmetrical components can be produced from a black POM solid rod.
Milling and drilling POM-C rod
In addition to turning, POM-C can also be milled and drilled very well.
This allows, for example:
- cross holes
- grooves
- surfaces
- threads
- recesses
- more complex geometries
to be introduced into the component.
For complex components, CNC machining may be useful.
POM-C black or natural?
Martan stocks POM-C rods in both black and natural.
POM-C black is particularly suitable when:
- a dark component colour is desired
- components are to be visually distinguished from one another
- technical visible parts are to be manufactured
- lower light transmission is desired
POM-C natural, by contrast, is the classic light-coloured standard version.
Here you can find our natural POM-C rods.
POM-C rod or POM-C sheet?
The suitable semi-finished product form depends on the later component geometry.
POM-C rods are particularly suitable for:
- turned parts
- bushes
- rollers
- rings
- bolts
- sleeves
POM-C sheets, by contrast, are particularly suitable for:
- flat components
- guide plates
- holders
- milled components
- technical covers
Here you can find our POM-C sheets.
POM-C black as rod or sheet?
If you specifically require the material in black, different semi-finished product forms are available.
For rotationally symmetrical components, the black rod is usually the more economical starting form.
For flat or predominantly milled components, a sheet is better suited.
You can find suitable flat material under black POM-C sheets.
POM-C or PE1000 rod?
POM-C and PE1000 differ significantly in their technical focus areas.
POM-C is particularly suitable for:
- high rigidity
- high dimensional accuracy
- precise machining
- dimensionally stable functional parts
- gears and precision components
PE1000 is particularly suitable for:
- high wear stress
- pronounced sliding movements
- conveyor technology
- heavily stressed guides
- abrasion applications
You can find suitable material under PE1000 / PE-UHMW rods.
POM-C or PEEK rod?
If significantly higher thermal requirements exist, PEEK can be an alternative to POM-C.
POM-C is of interest for many classic mechanical engineering applications in which:
- good machinability
- high dimensional accuracy
- good rigidity
- economical production
are the main focus.
PEEK is used above all when very high temperature or special chemical requirements also exist.
You can find suitable variants among our plastic rods.
Order black POM-C rods online
Order your black POM-C rods directly online from Martan Plastics.
You receive:
- black POM-C solid rods
- approx. 1,000 mm length
- various diameters
- round material for precision turned parts
- cut-to-size options
- very good mechanical machinability
- material for technical functional parts
Choose the suitable version now and order your black POM rod online.
Frequently asked questions about black POM-C rods
Can I buy black POM-C rods online?
Yes. Martan offers black POM-C rods as a standalone product in the online shop. You select the diameter and version directly on the product page.
How long are the black POM-C rods?
The product page states a length of approx. 1,000 mm.
Which diameters are available for black POM-C rods?
Various diameters can be selected on the product page. You can see the currently available sizes directly in the variant selection.
Can I cut POM-C rods to size?
POM-C can be sawn very well and then further machined mechanically. This allows round material to be prepared to the required component length.
Does black POM-C turn well?
Yes. POM-C has very good machinability and is particularly suitable for precision turned parts, bushes, rollers and other rotationally symmetrical components.
Can POM-C be milled and drilled?
Yes. In addition to turning, POM-C can be milled, drilled and sawn very well.
Are POM-C rods also available in natural?
Yes. Here you can find our natural POM-C rods.
Is black POM-C also available as a sheet?
Yes. You can find suitable flat semi-finished products under black POM-C sheets.
