This image was created with artificial intelligence – marked under Art. 50 of the AI Act, Regulation (EU) 2024/1689. It is a placeholder until the company's photos arrive.Rubber vs plastic vs metal in mechanical engineering
Comparison of rubber, plastic and metal in mechanical engineering. Properties, areas of application and decision-making aids explained concisely.
The choice of the right material in mechanical engineering decisively determines the performance, service life and cost-effectiveness of components. Every material decision has a direct effect on function, maintenance effort and operational safety. Even during the design phase, it is decided whether a component will work reliably in the long term or fail prematurely.
Rubber, plastic and metal differ fundamentally in their mechanical, thermal and chemical properties. These differences influence how components absorb forces, compensate for movements or cope with environmental influences. While rubber primarily stands for damping and sealing, plastics offer versatile solutions for lightweight construction and friction optimisation. Metals, on the other hand, form the basis for highly loaded and load-bearing structures.
A well-founded comparison of these materials creates the basis for technical decisions that go beyond pure material selection. It enables targeted matching to the respective application and helps to sustainably optimise costs, failure risks and maintenance intervals.
Importance of material selection in mechanical engineering
The choice of the right material influences the function, service life and cost-effectiveness of components in mechanical engineering. Materials determine how components behave under load, how they react to environmental influences and how long they reliably fulfil their function.
Depending on the application, different requirements are the focus: mechanical forces, temperature ranges, chemical loads or dynamic movements. The wrong material choice often leads to increased wear, failures or unnecessary costs. A well-considered decision ensures stable processes, reduced maintenance and higher overall efficiency of the system.
Properties of rubber in mechanical engineering
Typical materials: EPDM, NBR, silicone
Rubber belongs to the group of elastomers and is characterised by high elasticity and excellent damping properties. Components made of rubber adapt flexibly to dynamic loads and reduce vibrations and noise.
Rubber belongs to the group of elastomers and is characterised by high elasticity and excellent damping properties. Components made of rubber adapt flexibly to dynamic loads and reduce vibrations and noise.
Typical advantages:
- Very good damping of vibrations
- High elasticity
- Good sealing properties
Typical areas of application:
- Seals
- Vibration dampers
- Bearings
Properties of plastics in mechanical engineering
Typical materials: POM, PA, PTFE
Plastics offer a wide range of properties. Engineering plastics enable lightweight constructions combined with high chemical resistance.
They offer a wide range of properties. Engineering plastics enable lightweight constructions combined with high chemical resistance. Many materials have good sliding properties and are suitable for moving components.
Typical advantages:
- Low weight
- High corrosion resistance
- Good sliding properties
Typical areas of application:
- Plain bearings
- Guides
- Housings
Properties of metals in mechanical engineering
Typical materials: steel, aluminium, stainless steel
Metals stand for high strength and load capacity.
Metals stand for high strength and load capacity. They are suitable for load-bearing constructions and applications with high temperatures or mechanical forces.
Typical advantages:
- High mechanical strength
- Temperature resistance
- Long service life
Typical areas of application:
- Load-bearing components
- Machine frames
- Shafts and axles
Direct comparison of the materials
| Property | Rubber | Plastic | Metal |
|---|---|---|---|
| Elasticity | Very high | Medium | Low |
| Weight | Low | Very low | High |
| Strength | Low | Medium | Very high |
| Corrosion resistance | High | Very high | Medium |
| Temperature resistance | Medium | Medium | Very high |
| Damping | Very high | Low | Very low |
| Costs | Medium | Medium | High |
| Wear | Medium | Low | Very low |
| Friction | High | Low | Medium |
Areas of application in direct comparison
Practical example:
In a machine for conveyor technology, metal frames are often used for stability, while plastic plain bearings optimise movement and rubber elements reduce vibrations. This combination increases the service life and reduces maintenance costs.
Rubber is used wherever movements need to be compensated, vibrations reduced or media reliably sealed.
Rubber is used wherever movements need to be compensated, vibrations reduced or media reliably sealed. Typical applications are bearings, sealing systems or machine areas subject to vibration.
Plastics play to their strengths above all in sliding movements, low weight and chemical resistance. They are suitable for guides, plain bearings or components that are permanently in contact with moisture or aggressive media.
Metals are used when high mechanical loads, structural stability or temperature resistance are the priority. They form the basis for load-bearing constructions, shafts, axles and highly loaded machine elements.
Combination of materials in mechanical engineering
These combinations show that an isolated consideration of individual materials rarely leads to the best solution. In practice, high-performance systems are created through targeted material combinations.
Typical examples:
- Metal support with rubber mounting
- Plastic plain bearings in metal housings
- Composite components with elastomer coating
In many applications, optimal solutions are created by combining different materials. Metal provides stability, plastic provides friction optimisation and rubber provides damping.
Typical examples:
- Metal support with rubber mounting
- Plastic plain bearings in metal housings
- Composite components with elastomer coating
Selection criteria for the right material decision
A practical decision can often be made using simple logic:
When high forces and structural stability are the focus, metal is used. When friction is to be reduced and weight saved, plastic offers advantages. When vibrations, movements or seals play a role, rubber provides the right solution.
The selection of a suitable material always takes place in the interaction of several factors.
The selection of a suitable material always takes place in the interaction of several factors. Mechanical loads determine whether a material remains stable in the long term or fails prematurely. Temperature ranges influence the material structure and can lead to deformation or embrittlement.
In addition, chemical influences play a role, for example through oils, acids or moisture. The type of movement also determines the material choice, as friction, wear and damping are pronounced to different degrees. Economic aspects such as purchase costs, service life and maintenance effort round off the decision and lead to a holistic assessment.
Common mistakes in material selection
- Focus on individual properties instead of overall consideration
- Selection based on price instead of technical suitability
- Underestimating environmental influences such as temperature or chemicals
- Failure to take movement and friction into account
- Using a material outside its optimal application range
Limits of the materials
Every material has clear application limits. Rubber loses stability at high temperatures or under heavy mechanical load. Plastics can creep or deform under continuous load. Metals show weaknesses in corrosion or lack of damping.
A realistic assessment of these limits prevents wrong decisions and ensures long-lasting solutions.
- Focus on individual properties instead of overall consideration
- Selection based on price instead of technical suitability
- Underestimating environmental influences such as temperature or chemicals
- Failure to take movement and friction into account
- Using a material outside its optimal application range
Frequently asked questions about rubber, plastic and metal in mechanical engineering
Which material is suitable for vibration damping in mechanical engineering?
For vibration damping, rubber is best in many cases. Elastomers absorb movements, reduce vibrations and improve the smooth running of machines and systems.
When is plastic more sensible than metal in mechanical engineering?
Plastic is often the better choice when low weight, good sliding properties, corrosion resistance or chemical resistance are required. Typical examples are guides, plain bearings or housing parts.
When does metal remain the best solution in mechanical engineering?
Metal offers advantages with high mechanical loads, load-bearing constructions and elevated temperatures. For frames, shafts, axles or heavily stressed components, metal is often the suitable material basis.
What advantages does rubber offer over plastic and metal?
Rubber convinces above all through elasticity, damping and sealing. While plastic and metal are primarily designed for stability, sliding behaviour or load capacity, rubber plays to its strengths in dynamic movements and vibration-loaded applications.
What advantages does plastic have over rubber and metal?
Plastic combines low weight with versatile technical properties. Depending on the material, it offers good wear values, low friction and high resistance to moisture or chemicals.
Can rubber, plastic and metal be combined in one machine?
Yes, that is precisely what is very common in mechanical engineering. Metal provides stability, plastic improves sliding behaviour and rubber takes on damping or sealing. Such material combinations often lead to particularly long-lasting solutions.
What role does temperature play in material selection?
Temperature significantly influences the behaviour of every material. Rubber can lose stability at high heat, plastics can deform and metals usually retain their strength over larger temperature ranges.
Which mistakes happen particularly often in material selection in mechanical engineering?
Often only individual properties are considered, such as price or strength. In practice, friction, wear, temperature, chemicals, movement and service life must always be taken into account as well.
How can the right material decision be made more quickly?
A simple classification is helpful: rubber is usually suitable for damping and sealing, plastic often for lightweight and slidable components and metal in many cases for highly loaded constructions. This is followed by precise matching to the application and environment.
Our rubber sheets
For industry and trade, we offer a wide variety of rubber sheets.
SBR rubber sheet
Our high-quality SBR rubber sheet (styrene-butadiene rubber) is the solution for numerous industrial and commercial applications. This rubber sheet is manufactured from first-class styrene-butadiene rubber and is characterised by its outstanding physical properties.
EPDM rubber sheet
Discover the versatility and reliability of our EPDM rubber sheet, which is manufactured from ethylene-propylene-diene monomer (EPDM). This high-quality elastomer solution has been specially developed to meet the most demanding industrial and commercial applications.
NBR rubber sheet
The NBR rubber sheet is a high-quality industrial product that has been specially developed for applications requiring excellent resistance to oils, greases and various chemicals.
Viton rubber sheet
The Viton rubber sheet is a high-quality technical product that is used for a wide range of industrial applications. Manufactured from fluoro rubber (FKM), it offers outstanding properties that make it the ideal choice for extreme conditions.
FKM rubber sheet
The FKM rubber sheet is a high-quality technical product that is ideal for use in demanding industrial applications. Made from fluoro rubber (FKM), it is characterised by a wide range of outstanding properties that make it the optimal choice for extreme operating conditions.
Silicone rubber sheet
The silicone rubber sheet is a first-class technical product that has been specially developed for applications that place high demands on temperature resistance and flexibility.
PUR rubber sheet
The PUR rubber sheet, manufactured from high-quality polyurethane, is a technically advanced product that has been developed for applications that place the highest demands on abrasion resistance and mechanical load capacity.
Neoprene rubber sheet
The Neoprene rubber sheet, manufactured from high-quality chloroprene rubber (CR), is a versatile technical product that is ideal for a wide range of industrial and commercial applications.
