PE 1000 rod black

Would you like to buy PE1000 rods black? At Martan you can obtain black rods made of PE-UHMW as a technical semi-finished product for wear-stressed sliding, guide and conveyor technology components.

The rods are offered with a length of approx. 1,000 mm. Choose the suitable diameter and order your PE1000 rod black online.

Buy PE1000 rod black

PE1000, also referred to as PE-UHMW, is an ultra-high-molecular-weight polyethylene with particularly high wear resistance and very good sliding properties.

Black PE1000 rods are particularly suitable for technical functional parts that are permanently exposed to sliding, impact or abrasive stress.

Typical advantages:

• high wear resistance
• high abrasion resistance
• very good sliding properties
• low friction
• high impact strength
• good chemical resistance
• low water absorption
• good machinability
• black material colour
• cut to size possible

Choose the required diameter and order your PE-UHMW rod black directly online.

PE1000 rod black 1000 mm

The black PE1000 rods are offered with a length of approx. 1,000 mm.

The round material is suitable as a starting material for individual technical components or smaller series.

Typical components are:

• rollers
• bushes
• guides
• plain bearings
• rings
• sleeves
• spacers
• deflection rollers
• wear parts
• conveyor technology components

Depending on the required component length, the rod can subsequently be cut to size and further processed.

Select PE1000 rods by diameter

The diameter is one of the most important selection criteria for PE1000 round material.

You can select the specific rod diameters available directly via the variant selection on the product page.

When selecting, take particular account of:

• desired finished diameter
• machining allowance
• component geometry
• wall thickness
• mechanical load
• wear stress
• planned machining
• required tolerances

For turned parts, the starting diameter should provide sufficient material for subsequent finishing.

PE1000 rod cut to size

You do not need a full standard length?

Then a PE1000 rod cut to size can be useful.

The round material can be prepared to the required starting length and then further machined mechanically.

Suitable processes include:

• sawing
• turning
• milling
• drilling
• CNC machining

A suitably prepared PE-UHMW rod cut to size can reduce material consumption and machining effort.

Properties of PE1000 / PE-UHMW black

PE1000 is characterised in particular by its sliding and wear behaviour.

Typical properties are:

• high wear resistance
• high abrasion resistance
• very good sliding properties
• low coefficient of friction
• high impact strength
• good chemical resistance
• low water absorption
• good machinability

The black material colour is also suitable for applications where a dark technical appearance is desired.

Further information on the material can be found in our polyethylene material profile.

What are black PE1000 rods used for?

Black PE1000 rods are particularly suitable for components subject to high sliding, impact or wear stress.

Typical areas of application are:

• mechanical engineering
• plant engineering
• conveyor technology
• transport technology
• packaging technology
• material handling technology

Typical components are:

• plain bearings
• guide rollers
• bushes
• deflection rollers
• sliding elements
• spacers
• sleeves
• wear parts
• guides
• technical turned parts

PE1000 rod for conveyor technology

PE1000 is one of the typical materials for wear-stressed conveyor and sliding components.

Round material can be used to manufacture, for example:

• guide rollers
• deflection rollers
• sliding rollers
• bearing bushes
• guides
• spacers
• wear-stressed turned parts

The combination of low friction and high wear resistance is particularly interesting for permanently moving components.

Turning PE1000 rod

PE1000 can be machined with suitable tools.

From a PE1000 solid rod black, turning can be used to manufacture, for example:

• bushes
• rollers
• rings
• sleeves
• spacers
• guide components

During machining, tool geometry, cutting parameters, heat input and chip removal should be adapted to the properties of PE1000.

Milling and drilling PE1000 rod

In addition to turning, PE1000 can also be milled and drilled.

This allows, among other things:

• cross holes
• grooves
• surfaces
• recesses
• fastening holes

to be introduced into the component.

For more complex geometries, CNC machining can be useful.

PE1000 black or natural?

Martan also stocks PE1000 rods in natural.

PE1000 black is particularly suitable when:

• a dark component colour is desired
• components are to be visually differentiated
• a technical black appearance is required

PE1000 natural is the classic light-coloured standard version.

Here you will find our PE1000 / PE-UHMW rods natural.

PE1000 black or green?

In addition to black and natural, Martan also stocks PE1000 round material in green.

The green variant is particularly suitable when clear colour coding of components or functional areas is desired.

Here you will find our PE1000 / PE-UHMW rods green.

PE1000 rod or sheet?

The suitable semi-finished product form depends on the subsequent component geometry.

PE1000 rods are particularly suitable for:

• rollers
• bushes
• rings
• sleeves
• turned parts
• rotationally symmetrical components

PE1000 sheets are particularly suitable for:

• slide rails
• guide plates
• linings
• wear plates
• flat milled parts

You can find suitable flat material under PE1000 / PE-UHMW sheets.

PE1000 black as rod or sheet?

If you specifically require PE1000 in black, the component geometry should determine the suitable semi-finished product form.

For rotationally symmetrical components, round material is usually more economical.

For flat or predominantly milled components, a sheet is more suitable.

You can find suitable material under PE1000 / PE-UHMW sheets black.

PE1000 or PE300 rod?

PE1000 and PE300 both belong to the polyethylene family, but have different technical focuses.

PE1000 is particularly suitable for:

• high wear stress
• high abrasion load
• heavy sliding movements
• conveyor technology
• wear-stressed guides

PE300 / PE-HD is suitable as an economical standard plastic for technical components subject to less severe wear stress.

You can find suitable material under PE300 / PE-HD rods.

PE1000 or POM-C rod?

PE1000 and POM-C are both suitable for technical functional parts, but have different strengths.

PE1000 offers advantages in:

• wear
• abrasion
• sliding properties
• impact stress

POM-C offers advantages in:

• rigidity
• dimensional stability
• precise machining
• dimensionally stable precision components

For components with particularly high requirements for dimensional stability, POM-C round material may be the more suitable solution.

Order black PE1000 rods online

Order your black PE1000 rods directly online from Martan Plastics.

You receive:

• black PE1000 / PE-UHMW rods
• approx. 1,000 mm length
• various diameters
• round material for sliding and wear parts
• cut to size
• good machinability
• material for technical turned parts

Choose the suitable version now and order your PE1000 rod black online.

Frequently asked questions about black PE1000 rods

Can I buy black PE1000 rods online?

Yes. Martan stocks black PE1000 / PE-UHMW rods as a separate product in the online shop.

How long are black PE1000 rods?

The product page states a length of approx. 1,000 mm.

Which diameters are available for black PE1000 rods?

Various diameters are available. You can see the specific sizes that can be ordered directly in the variant selection.

Can I order PE1000 rods cut to size?

PE1000 can be cut to the required starting length and then further machined mechanically.

Does PE1000 turn well?

Yes. PE1000 can be machined and is suitable, among other things, for rollers, bushes, sleeves and other rotationally symmetrical components.

What is PE1000 particularly suitable for?

PE1000 is particularly suitable for heavily wear-stressed sliding, guide and conveyor technology components.

Are PE1000 rods also available in natural?

Yes. Here you will find our PE1000 / PE-UHMW rods natural.

Are PE1000 rods also available in green?

Yes. Here you will find our PE1000 / PE-UHMW rods green.

Is PE1000 black also available as a sheet?

Yes. You can find suitable flat semi-finished products under PE1000 / PE-UHMW sheets black.