Measuring and ordering aluminium sheets correctly

Why precise measuring is crucial

Even small deviations when measuring aluminium sheets can lead to problems during installation or further processing. Particularly with applications requiring millimetre accuracy – for example in mechanical engineering, enclosure construction or interior fitting – the correct dimensions determine fit and functionality. Anyone who does not determine their dimensions exactly risks unnecessary costs through complaints, re-cuts or time-consuming rework.

What is more: many installation situations do not allow the sheet to be adjusted afterwards. If it is too large, it will not fit; if it is too small, unsightly gaps or an unstable hold will result. Dimensional accuracy is also crucial for screw fixings, covers or technical fits. Precise measuring not only creates functional reliability, but also saves time, material and frustration. Anyone who works carefully here lays the foundation for a high-quality end result.

Basic terms: understanding length, width and thickness correctly

• Length refers to the longer edge of the sheet in horizontal orientation (usually measured from left to right).
• Width is the shorter side, measured from front to back.
• Thickness or material thickness describes the height of the sheet – that is, the dimension perpendicular to the surface.

Important: The terms should be used consistently, particularly when filling in the configurator or when making enquiries to the service team.

Step-by-step guide to measuring

1. Clarify the purpose: Will the sheet be used freely or is it to fit exactly into a frame or cut-out?
2. Choose the measuring tool: Where possible, use a precise folding rule, a tape measure or – for higher requirements – a digital calliper.
3. Internal or external dimension? For the internal dimension (e.g. for surrounds), deduct a little installation clearance if necessary (1–3 mm depending on the tolerance requirement). For the external dimension (e.g. as a cover), you should allow for a little overhang if necessary.
4. Measure several times: Carry out at least two measurements per side in order to detect any skew or dimensional deviations.
5. Determine the thickness: Check whether existing aluminium sheets can serve as a template or whether there are design specifications for the material thickness.

Typical measuring errors and how to avoid them

Dimensions swapped

A common error is swapping length and width. Make sure you always record the dimensions in the same order and orientation.

Measured at an angle

A skewed measuring angle can distort the values. Always place the measuring tool at right angles to the edge of the sheet.

Forgetting installation clearance

Anyone who does not allow for a tolerance risks the sheet not fitting later or jamming. Allow 1–2 mm installation clearance depending on the application.

Wrong reference point

Dimensions should always be taken from a fixed, traceable point – for example, for wall mountings, from the finished wall surface.

Not averaged

With irregular or skewed surfaces, it is advisable to measure at several points and form an average from them, or to make a template.

Entering dimensions correctly in the configurator

In the configurator you enter your dimensions in millimetres. Note the following points:

• Observe the unit of measurement: Do not use cm or inches
• Enter numbers only – no special characters, spaces or units
• Length x width x thickness – think in this order
• Request rounding or cut-outs separately if necessary, if they cannot be represented in the configurator

You can find detailed configurator instructions here.

Tolerances, installation clearance & practical tips

Every machining operation involves certain tolerances. Standard tolerances for aluminium sheet cut pieces are usually around ±1 mm. For technical applications, it is advisable to allow at least 1–2 mm installation clearance in order to compensate for manufacturing tolerances.

For particularly close-fitting elements, the dimensions should ideally be agreed with customer service or a technical drawing attached. In addition, the thermal behaviour of aluminium plays a role – with large sheets or in outdoor areas, the material can expand in heat, which should be taken into account with tight fits.

Glossary: dimensions for aluminium sheets

Term	Meaning
Length	Longer side in horizontal orientation
Width	Shorter side, measured from front to back
Thickness	Material thickness, measured perpendicular to the surface

Confidently to the right aluminium sheet

With precise measuring, clear dimensions and a little tolerance reserve, your order will succeed without complications. Use the configurator for simple formats or send complex requirements directly to the service team. That way you secure close-fitting aluminium sheets for your project – efficiently, exactly and without nasty surprises.

Measure confidently and order correctly: Configure your aluminium cut to size directly online or have your details checked in advance.

Frequently asked questions about specifying dimensions

How do I measure an aluminium sheet correctly? Use an accurate measuring tool and measure length, width and thickness several times each. Make sure measurements are at right angles and allow for tolerance reserves.

Which dimensions must I specify when ordering? Always specify length, width and thickness in millimetres – without units or special characters. Observe the order length × width × thickness.

What if my dimensions are not quite exact? If you are unsure or have complex installation situations, a sketch or a consultation with customer service is advisable. In many cases, tolerances of ±1 mm are usual.