PTFE Sheets from the Professional

PTFE semi-finished products are PTFE products as rods, cut pieces or as PTFE sheets. PTFE sheets are a product made from polytetrafluoroethylene, a special plastic.

We offer you dimensions of up to:

• 43000 mm length
• 4300 mm width
• 100 mm material thickness

Sheets made from polytetrafluoroethylene (PTFE) from PTFE24

PTFE sheets against chemically aggressive substances. Polytetrafluoroethylene (PTFE) is also known in the trade under the name Teflon. Are you surprised that Teflon is no longer used in the clothing and shoe industries? That is not correct, however there it is known under the name Gore-Tex. This plastic belongs to the thermoplastics. PTFE sheets are often used in those areas where aggressive chemicals are used, because of their chemical inertness. PTFE24 offers PTFE sheets in a large selection.

Weight and composition as PDF

PTFE weights - PTFE composition

Sheets made from PTFE (Teflon©)

Thickness (mm)	Tolerance (mm)	Length x width (mm)	Tolerances (mm)
1.0	0 ~ +0.10	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
1.5	0 ~ +0.20	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
2.0	0 ~ +0.20	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
2.5	0 ~ +0.30	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
3.0	0 ~ +0.30	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
4.0	0 ~ +0.50	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
5.0	0 ~ +0.75	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
6.0	0 ~ +0.75	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
8.0	0 ~ +0.90	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
10.0	0 ~ +1.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
12.0	0 ~ +1.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
13.0	0 ~ +1.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
14.0	0 ~ +1.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
15.0	0 ~ +2.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
18.0	0 ~ +2.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
20.0	0 ~ +2.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
25.0	0 ~ +2.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
30.0	0 ~ +2.50	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
35.0	0 ~ +2.50	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
40.0	0 ~ +3.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
45.0	0 ~ +3.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
50.0	0 ~ +3.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
55.0	0 ~ +3.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
60.0	0 ~ +3.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
65.0	0 ~ +3.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
70.0	0 ~ +4.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
75.0	0 ~ +4.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
80.0	0 ~ +4.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
85.0	0 ~ +4.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
90.0	0 ~ +5.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
95.0	0 ~ +5.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
100.0	0 ~ +6.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
110.0	0 ~ +8.00	600х600; 1000x1000; 1200x1200; 1500x1500; 1000x2000	0 ~ +20; 0 ~ +30; 0 ~ +40
120.0	0 ~ +8.00	600х600	0 ~ +20
130.0	0 ~ +8.00	600х600	0 ~ +20
140.0	0 ~ +8.00	600х600	0 ~ +20
150.0	0 ~ +8.00	600х600	0 ~ +20

Where are these sheets used?

Because of their great resistance to chemicals, these sheets are used in chemical plant construction for lining. In plastics processing, PTFE is used for moulds because of its non-stick property. In high-frequency technology, PTFE is used as an insulating material (low dielectric constant). This property is used in the production of high-frequency circuit boards. PTFE is flame-retardant, which is used in the construction industry for lining façades and roofs. PTFE is used in many areas, such as medicine (implants, etc.), the textile industry, cookware production and the military (projectiles).

The properties of polytetrafluoroethylene

Polytetrafluoroethylene has excellent sliding properties, with a low coefficient of friction, and has good resistance to chemical substances and solvents. Furthermore, polytetrafluoroethylene is physiologically harmless and has very good insulating properties. PTFE ((Teflon©) has a thermal application range from -200°C to +200°C. The melting range of polytetrafluoroethylene is +320 to +345°C.

What are PTFE sheets?

PTFE belongs to the so-called high-temperature plastics and is therefore suitable for many applications in industry and plant construction, but it is also used in other areas. PTFE sheets are used, among other things, by automotive suppliers, manufacturers of packaging machines, mechanical engineering and window manufacturers specialising in plastic, conveyor system construction, the chemical, rubber and carpet industries, drywall construction, laboratory technology, transport and conveyor technology, in the medical sector, the technical trade and the beverage and food industry, among other things as a cutting mat. PTFE has approval for the food sector. In the clothing and shoe industry, PTFE is also commonly known under the name Gore-Tex. Thanks to the PTFE, the articles are permanently waterproof and windproof. As well as very breathable. Polytetrafluoroethylene is a plastic that is widely used, so it is also referred to as a high-performance plastic. PTFE is the abbreviation for polytetrafluoroethylene. It belongs to the group of thermoplastics. But PTFE is also known under the trade name Teflon®, among others. Teflon® immediately makes you think of coated pans and pots, baking moulds, as well as irons. PTFE is a straight-chain plastic made from fluorine and hydrocarbon. Which is available in a wide variety of colours. White PTFE sheets are used in the food industry as well as in the drinking water sector, as they are physiologically harmless and food-safe. The plastic feels waxy. Its different sizes and thicknesses also allow it to be used in many areas.

The special feature of PTFE is that it can be used in many ways. It withstands very cold and high temperatures, various types of acid, gases and alcohol cannot harm the plastic. It has flawless insulating behaviour and has a masterful sliding property. The plastic has a low coefficient of friction and is flame-retardant. PTFE is used over a large temperature range from -200 °C to 260 °C. At -200 °C it still exhibits a low level of flexibility. For short periods, PTFE can also be used in a temperature range of up to 300 °C. However, this is then the pain threshold; PTFE does not withstand this temperature for long either. The ideal melting range of polytetrafluoroethylene is +320 to +345°C.

The plastic is very often used as a plain bearing in mechanical engineering or in the construction of bridges. It serves ideally as machine components where PTFE has to withstand very high and cold temperatures; in chemical plant construction it is often used as a lining plastic for expansion joints and pipelines, among other things. In medical technology it is used as implants, among other things.

PTFE sheets are also referred to as semi-finished products. Semi-finished products are, as the name suggests, products that only form a whole in combination with other product parts. Semi-finished products are not only sheets, but also rods, hollow rods, tubes or cut pieces. You can buy all of this online at PTFE24.

PTFE sheets are available in a length of up to 43000 mm, a width of up to 4300 mm and a material thickness of up to 100 mm. The sheets are made to fit your requirements exactly, or you may wish to receive the PTFE sheets in the standard size. The sheets, which you order for a prototype, a large or small series, among other things, can if necessary also be used in their application. The PTFE sheets can be tempered, bent, polished, sawn, milled, turned or planed.

Which processing methods does PTFE24 offer?

Customer satisfaction is the top priority at PTFE24. As one of the leading suppliers of PTFE products of all kinds, we always stay up to date and use only the most modern CNC processing methods in production. Our online shop offers a broad range of PTFE sheets, from which you can choose the one that suits you. Depending on your requirements, our experts then use the right technique, such as bending, sawing, planing or turning, to realise your desired product. It makes no difference to our team whether you need a prototype or a large series. Custom-made products mean challenges for us, and we love those. If you are looking for a particular plastic or need special manufacturing techniques such as centreless round cutting in addition to PTFE sheets, we are also the right contact for you.

In which areas are we active?

The possible applications of PTFE are diverse and range from PTFE cut to size to Teflon® rods. Among other things, the company manufactures seals, guide rings, plain bearings and hoses for plant construction and mechanical engineering. PTFE products are also used in transport and conveyor technology, such as roller coatings or conveyor belts. In the packaging industry, coatings for cutting blades or film seals are produced, while in water technology, membranes or pipe linings are made from PTFE. In shopfitting, for example, displays or shelf boards are finished with coatings made from PTFE. In addition, the company also offers products for automation technology, such as guide elements or plug connections. In the beverage and food industry, it is primarily coatings for conveyor belts or timing belts that are made from PTFE. Products made from this material are also used in medical and laboratory technology, for example for catheters or closures for test tubes. Thanks to its special properties such as temperature resistance, chemical resistance or high sliding properties, PTFE is suitable for many different industries and applications and is therefore an important material in industry.

What makes our online shop stand out?

Customer satisfaction is our top priority. In addition to a large selection of semi-finished products, PTFE turned parts PTFE semi-finished products PTFE turned parts and numerous other products made from polytetrafluoroethylene, we place great value on high-quality processing and customer satisfaction. We guarantee the latter, among other things, through transparent and fast communication from the production of the PTFE sheets through to delivery. If you are unsure which solutions are the right ones for your business, we are happy to come to your site and see for ourselves. Thanks to our XXL machine park, we can also deliver larger orders in a short time. In combination with fair prices and a 24-hour PTFE cut-to-size service, we see ourselves as your number one contact for PTFE sheets.

Conclusion

You can obtain PTFE sheets from your professional ptfe24.de in various thicknesses. Our customers can rely on receiving precision products that fit exactly to the millimetre. You tell us what requirements you have for your Teflon sheets and we take care of the implementation from the design through to the final production. In addition, custom-made products that are not directly available in the shop are also possible. Talk to us: our staff will gladly turn your requirements into high-quality PTFE sheets.